The appearance of a motorcycle is certainly an important thing for every owner. Not without reason, because an attractive appearance will certainly add confidence to each owner. To be able to make the appearance of a motorcycle more attractive itself, there are several ways that can be done.

One way that can be done is to repaint the motorcycle body. By doing this repaint will obviously make the appearance of the motorcycle will look new and be much more attractive. Even so, the repainting process itself certainly cannot be done arbitrarily. It is necessary to pay attention to the steps to repaint and choose the right color in order to get maximum display results.

Steps to Do the Right Motorcycle Repaint

Before you decide to repaint the desired motorcycle, of course, it is very important to know the steps that must be taken when you want to repaint. The problem is that if the repainting process is not carried out properly, the results will also be disappointing. Here are some steps to repaint the right motorbike that you can follow.

1. Prepare the Equipment Needed

The first step you can do is to prepare the equipment needed first. Because of course in the repaint steps, there are some equipment that must be prepared. Call it equipment such as epoxy, thinner, paint, fine sandpaper, steel and others.

2. Clean the Motor Part to be Repainted

A mistake that is still often made by many people is not washing the motorbike when they are going to do a repaint. Even though it is certain that a motorbike that is not cleaned or washed will leave traces of dirt and dust. This will then make the repaint result not optimal and even ugly.

3. Do Sanding

The sanding process is arguably the most important part of the motorcycle repainting process. Because this sanding process will remove the old paint marks that are still attached to the motorcycle. Because if the old paint is still attached, it will certainly damage the quality of the appearance of the repaint itself.

4. Start Repainting

You have arrived at the most important part, which is repainting your motorcycle. Usually when doing this repaint, it is very important to first apply a primer to the motorcycle. The base paint itself is usually colored like white or silver.

5. Give Coating

The final step is to apply a coating to the part that has been repainted. This coating itself is quite useful for making the original color appear more out or appear more. Only then will it be finished with a polishing technique that makes the repaint more visible and of course more durable.

6. Choose a Violet Violet

When repainting, of course, color selection is a very important thing to consider. However, it turns out that the Violet Violet color is still a mainstay as well as a favorite of many people. This can not be separated because of the combination for paint with a different color base so that after being given violet violet, the base color will look like there is a purple effect. Any base color can be used to combine Violet Violet.

Conclusion

So the conclusion is that doing repaint on a motorcycle must pay attention to many things. Like the color selection, you can choose a violet-violet color and also make sure the color selection is also of good quality. For that, always choose Premium Diton paint which is well known for its quality. Find out more about Diton Premium on the website https://ditonpremium.com/